Ivation IVABC620SS User Manual

7
INSTRUCTIONS
REVERSING THE DOOR SWING
INSTRUCTIONS
In some applications, you may want the door to open in the
opposite direction. To reverse the door swing, follow the
instructions below.
Required tools: Flathead screwdriver, Philips screwdriver
1. Place the cooler on its side on a flat, level surface.
2. Remove the cover (part 1) by lifting from the back with a
flathead screwdriver. Once the back releases, slide the cover
forward to remove. (NOTE: Place a thin towel between the
screwdriver and the cooler to avoid scratches.)
3. Remove the upper hinge screws (part 2) using a Philips
screwdriver to free the upper hinge (part 5) from the cooler.
With the upper hinge removed, slide the door o.
4. Remove the blanking plugs (part 8) from the top and bottom
of the door and move them to the other side of the door. You
may need to use a flathead screwdriver to remove them.
5. Remove the lower hinge screws (part 6) and both feet (part
7) to free the lower hinge (part 3) from the cooler. Also
remove the screw in front of the foot that was not on the
side with the hinge.
6. Gently remove the flat cover (part 4) using a flathead
screwdriver and mount it to the opposite side of the cooler.
Press down to mount.
1
2
5
8
7
6
3
4
1
Cover
2
Upper hinge screws
3
Lower hinge
4
Flat cover
5
Upper hinge
6
Lower hinge screws
7
Feet
8
Blanking plug

Ivation IVABC620SS Specifications

General

Brand	Ivation
Model	IVABC620SS
Category	Refrigerator
Language	English