Ivation IVAPWS8WT - Page 2

Preparation
• This unit is equipped with a built-in pump for fast and easy draining. Position the drain hose so that discharged water will easily flow away
from the machine.
• Plug the power supply cord into an AC outlet with voltage corresponding to the rating label of the appliance. To reduce risk of electric shock,
plug into a ground fault circuit interrupter (GFCI) outlet.
• Insert the water inlet hose into water inlet connector.
• Refer to the water level mark and select the water level according to the volume of laundry to be washed or rinsed.
Operation
Wash
• Connect the drain hose and water inlet hose.
• Add water and detergent. Turn the WASH knob to dissolve and stir laundry detergent in water.
• Put laundry into machine.
• Use the timer to select washing duration.
• Select the appropriate wash mode (normal or strong) by turning the NORMAL/STRONG/DRAIN knob. Washing will begin.
Drain
When washing or rinsing is complete, turn the knob to the DRAIN position. Turn the knob back to NORMAL when draining is complete.
Intermediate Spin
• Move laundry from the wash tub to the spin tub. Arrange laundry uniformly so that the weight is evenly distributed. An unbalanced tug may
cause vibration and noise.
• Press the laundry down firmly and place the safety over on top.
• Close the outer cover of the spin tub and spin laundry for 1 minute.
Soak/Rinse
Place laundry into wash tub. Set the timer for 1 – 5 minutes. Select water level and wash mode. Let rinse. Drain water.
Spin Dry
Move laundry to the spin tub. Arrange laundry uniformly so that the weight is evenly distributed. An unbalanced tug may cause vibration and noise.
Press the laundry down firmly and place the safety cover on top.
Close the outer cover of the spin tub and spin laundry for 1 – 5 minutes. (Spin duration: 1 minute, 3 minutes, 5 minutes.)
If abnormal noise or vibration occurs, open the spin tub cover and rearrange the laundry. Resume operation.
2