28
PRESCRIPTIONS
1. Do not disconnect battery power when the engine is running.
2. Do not perform arch soldering near the engine without having
removed al electric connections and electronic units.
3. After each maintenance involving disconnection of battery clamps,
make sure they have been securely tightened on the relevant poles.
4. Do not start the engine using the battery charger.
5. Disconnect batteries from on board power source while they are
being recharged.
6. Do not paint equipment, components and electrical connectors of
the engine fitting.
7. Disconnect batteries from power source before any electrical
intervention.
8. Before on board installation of any electronic equipment, contact
the Yard (two-way radio, echo sounder).
HOW TO
Engine lubricant level inspection
Proceed only with engine stopped and at low temperature to avoid
any risk of burns.
Using the dip stick (1), that the oil quantity is included between
"Min" and "Max" limits.
Refill if level is insufficient, using the hole on top of cylinder head.
Remove the cap (2).
3
2
05_008_C
1
To Next Page
Loading...
Need help?
General
