Iveco Motors Cursor 13 Series User Manual

4
C13 ENT M50 ENGINE TECHNICAL DATA
The technical acronym and the serial number are specified on the
nameplate which - based on the model - can be found on different
parts of the engine: flywheel casing, tappet cover, coolant pan.
(*)Flywheel net power compliant with ISO 3046-1 standard. Testing
conditions: T 25°C; atmospheric pressure 100 kPa; relative
humidity 30%.
Acronym C13 ENT M50
Engine family F3B
Cycle 4-Stroke Diesel
Number and arrangement
of cylinders 6, in line
Stroke boring 135 x 150 mm
Total diplacement 12,800 cm
3
Air supply Boosted and post-cooled
(TCA or TAA)
Injection method Direct EUI with electronic management
Engine rotation direction Counterclockwise
(from flywheel side)
Weight without liquids 2,965.22 lb
Electrical system 24 V
Battery/ies
capacity
breakaway current
120 Ah or higher
900 A or higher
Available ratings (*) C13 ENT M50
C 382 kW (520 CV) @ 2000 rpm
D 368
kW (520 CV) @ 2000 rpm
WARNING
It is strictly forbidden to alterate the above mentioned features and
more specifically to change the information stored in the electronic
units of the injection system or the engine and relevant fitting features.
Any non observance of the above shall null any warranty and IVECO
MOTORS liability.

Iveco Motors Cursor 13 Series Specifications

General

Brand	Iveco Motors
Model	Cursor 13 Series
Category	Engine
Language	English