iWALK 2.0 - User Manual

Guide for inserting support tubes into the Knee Platform socket.

Instructions to secure the right and left support tubes into the Knee Platform.

Steps to securely attach the lower assembly to the Knee Platform.

Guidance on positioning the clamp and inserting the clamp bolt and nut.

Instructions for attaching the thigh supports to the handle, ensuring teeth interlock.

How to attach and lock the straps using T Lock Buckles and Gray buckles.

Remove straps and loosen thumb screws to allow free rotation of supports.

Adjusting the foot orientation for correct left or right leg use.

Setting the initial lower crutch height relative to the kneecap.

Positioning the thigh supports by adjusting their height on the handle.

Tilting the crutch inward and tightening thumb screws to lock thigh supports.

Extending strap sections and installing T Lock buckles onto the crutch.

Draping straps over the knee and tensioning them using the gray buckles.

Ensuring the knee strap is snug against the lower thigh.

Centering the comfort pads on the back of the user's legs.

Detensioning and removing buckles to safely remove the crutch.

Performing exercises to learn crutch balance before attempting to walk.

Guidance on taking initial steps with the iWALK 2.0, starting with short steps.

Fine-tuning the Knee Platform height for improved gait efficiency.

Instructions for safely ascending and descending stairs with the iWALK 2.0.

Advice for a smoother learning curve, including relaxation and posture.