When using the grinder, its operation can be affected by the coffee beans and block the outlet
channel of the ground coffee.
The appliance must be cleaned immediately:
• Once every two weeks.
• When there is a reduction in the amount of ground coffee.
• When the coffee grinder is used to grind fine coffee powder.
When cleaning the grinder, make sure that there are no coffee beans in the container and that when
you press the “GRIND” button (31), the grinder works but no coffee powder comes out of the outlet.
1. Remove the container (3) by turning it counterclockwise in position.
2. Remove the grinder wheel by turning it counterclockwise.
3. Use the cleaning brush (18) to clean the grinder wheel and the blades.
CAUTION: Do not clean the grinder blades and the wheel with water.
4. Use the cleaning brush (18) to clean the ground coffee outlet channel.
5. Before assembling the coffee grinder, place only the container empty without the grinder wheel.
Press the “GRIND” button (31) to remove any coffee powder residue in the grinder chamber.
6. If coffee powder remains in the grinder chamber, repeat steps 4 & 5.
7. When cleaning is complete, remove the container, replace the grinder wheel and replace the
container.
• Always switch off, unplug and allow to cool before cleaning the appliance.
• Don’t wash parts of the appliance in the dishwasher
• Clean all removable parts of the appliance after each use with warm soapy water. Rinse well and
dry thoroughly.
• Clean the outer parts of the appliance with a soft, damp cloth.
CAUTION: Do not immerse the coffee maker in water or any other liquid.
• Do not clean the inside of the water tank with a cloth while may cause remnants of the fabric fibers
and clog the coffee maker.
•Do not clean with alcohol, or solvent cleanser.
To Next Page
Loading...
