130311
QUICK START GUIDE
Thank you for choosing Chase Mobile Checkout. Minimum
compatibility requirements to use Chase Mobile Checkout with
the eDynamo are a mobile device using iOS 10.0, Android
TM
6.0
and Bluetooth
®
4.0. To begin accepting card payments with your
mobile device, just follow these easy steps:
1. CHARGE CARD READER
This kit includes a new eDynamo chip card reader and USB
charging cable. The card reader’s battery requires three hours
to fully charge. The General Status LED light will blink green
while charging, and then switch to solid green when complete.
Use the USB cable to recharge the card reader as needed.
2. DOWNLOAD APP
Download Chase Mobile Checkout from the Google Play™ Store
or Apple App® Store, then launch the application.
3. ENTER CREDENTIALS
Enter your username and password, then tap Log On. If you’ve
never used this mobile device with Chase Mobile Checkout,
you’ll need to register it using an Identification Code we will
email you. If you’re a new user, we sent your username and
temporary password in two separate emails.
4. PAIR CARD READER
a. Before you start the pairing process, make sure your phone
or tablet has Bluetooth® enabled in its Settings area.
b.
Once you’re logged on to the Chase Mobile Checkout app,
tap More (phone) or the gear icon (iPad). Then tap User
Preferences. At the bottom of the User Preferences screen,
tap Card Readers.
continued on back
Chase Mobile
Checkout
JPMorgan Chase & Co.
GET
chase mobile checkout
2. DOWNLOAD APP
CARD
SWIPE
PATH
►
CHIP CARD SLOT
▼
▼
1. CHARGE CARD READER
◄
PUSH-
BUTTON
BLUETOOTH
STATUS LED
◄
Mobile Devices
eDynamo – Connected
Bluetooth
Pairing Request
Cancel Pair
4. PAIR CARD READER
999999
GENERAL
STATUS LED
Log On
k************a
Enter Your Password
Forgot Password?
Save User Nam
e
3. ENTER CREDENTIALS
Save Username
To Next Page
Need help?
General