How To Switch Connection Mode:
1. 2.4G Mode:
Turn the power switch to ON state
Lightly press the mode button to switch to 2.4G mode (the second green
indicator light)
Insert the 2.4G receiver into the computer USB port
Wait for the computer to identify the mouse after which it can be used
normally
2. Bluetooth Mode (Device name: BT 5.1 Mouse / BT 3.1 Mouse)
NOTE: The mouse features two Bluetooth modes and can connect and cycle
between two Bluetooth devices
BT Mode 1: BT 5.1 Mouse
Turn the power switch to ON state
Press the mode button to switch to Bluetooth Mode 1; Third blue indicator
light for BT Mode 1 (BT 5.1)
Then long press the mode button (roughly 3 seconds) to enter pairing
mode. The third blue indicator light (for BT 1) will start flashing
Search for “BT 5.1 Mouse” on your computer, connect, and use
BT Mode 2: BT 3.1 Mouse
Turn the power switch to ON state
Press the mode button to switch to Bluetooth Mode 2; Fourth blue indicator
light for BT Mode 2 (BT 3.1)
Then long press the mode button (roughly 3 seconds) to enter pairing
mode. The fourth blue indicator light (for BT 2) will start flashing
Search for “BT 3.1 Mouse” on your computer, connect, and use
5.
To Next Page
Loading...