Sport lock
If you have ordered sport locks with your hearing aids
and mounted them as instructed on page 43, insert
them as follows:
To insert a hearing aid with a sport lock:
1. Insert the hearing aid as usual
2. Tuck the sport lock into the bottom of the concha
(the part of your ear just outside the ear canal).
NOTE: Sport locks may become stiff, brittle, or discolored over time and need replacement. Contact
Jabra Enhance for further information and ordering. See the back page for contact information.
Ensuring a proper fit of your hearing aid
To check if the hearing aid is placed correctly:
• The body of the hearing aid should be placed just behind your ear.
• When inserted in your ear canal, the dome should feel secure and comfortable. See
"Inserting the receiver dome into your ear", page 18 on how to insert the dome.
• The receiver wire should fit comfortably around the top of your ear.
– If the wire is too long, it may bend away from your ear.
– If the wire is too short, it may feel tight and may pull the dome partly out of your ear.
19
To Next Page
Loading...
Need help?
General
