Jabra GN 1000 User Manual

For more information and technical specifications:
www.gnnetcom.com
CORPORATE HEADQUARTERS
77 Northeastern Blvd.
Nashua, NH • 03062
1-800-826-4656
1-603-598-1100
Fax: 1-603-598-1122
© 2002 GN Netcom, Inc. • All rights reserved.
54-0314A • Printed in China
User Guide
GN 1000
Remote Handset Lifter (RHL)
1. Lifter Arm Height Control
2. Lifter Arm
3. Ring Sensor Platform
4. Ring Sensor
5. Ring Sensitivity LED/Online Indicator
6. Power Cord
7. AUX Plug
8. Ring Sensor On/Off Button
9. Ring Sensitivity Knob
10. External Sensor Port
11. External Sensor
12. Velcro
Functions/Indicators
1. Lifter Arm Height Control: Position toward the “+” to
raise the lifter higher and toward the “-” to lower the lifter
if it is too high.
5. Ring Sensitivity LED/Online Indicator: Lights when the
handset is lifted and you have clear dialtone; flashes when
the Ring Sensor Power Button is disabled.
8. Ring Sensor On/Off Button: Press to disable the
Ring Sensor if using the speakerphone when your phone
is connected to a wireless headset Beltpack system.
Netcom
Netcom
10
9
3
8
5
7
4
1
2
6
11
12
Components
The GN 1000 Remote Handset Lifter, designed exclusively for use with
GN Netcom wireless headset systems, lifts the handset from your telephone
so you can answer and end calls when away from your desk.
5
1

Jabra GN 1000 Specifications

General

Brand	Jabra
Model	GN 1000
Category	Handsets
Language	English

Summary

GN 1000 Remote Handset Lifter Functions

Lifter Arm Height Adjustment

Controls the vertical position of the lifter arm for optimal handset engagement.

Ring Sensitivity LED and Online Indicator

Indicates handset lift status and ring sensor activity. Flashes when ring sensor is disabled.

Ring Sensor On/Off Button

Disables the ring sensor for speakerphone use to prevent interference.

Using the GN 1000 Lifter System

Putting on the Headset

Instruction for wearing the headset correctly before operating the lifter.

Activating the Lifter

Pressing the Handset Lifter Button to put the wireless system in Headset Mode and activate the lifter.

Lifting the Handset

The lifter arm raises the handset, and dialtone is heard.

Adjusting Lifter Arm Height

Positioning the height control to raise or lower the arm if dial tone is not heard.

Adjusting Ring Sensor Sensitivity

Turning the knob to increase or decrease sensitivity for optimal ring detection.

Frequently Asked Questions

Lifter Not Lifting Handset

Troubleshooting steps for when the remote handset lifter fails to lift the handset.

No Dial Tone Heard

Solutions for not hearing dial tone after the handset is lifted.

Signal Heard, No Call Connecting

Resolving issues with hearing a signal but no call connecting.

No Signal or Call Not Coming Through

Guidance when calls are received but no signal is heard.

Online Indicator Not Lighting

Troubleshooting steps for when the online indicator does not illuminate during a call.

Speakerphone Signal Interference

Preventing headset/beltpack signaling when using the telephone's speakerphone.