Jabra Halo Fusion
How do I pair my Jabra Halo Fusion with my mobile device?
To pair your Jabra Halo Fusion with your smartphone, tablet, or other
mobile device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn off your Jabra Halo Fusion by pressing and holding (3 seconds)
the Multi-function button on the left side of the neckband until the
LED flashes.
3. To enter pairing mode, press and hold (5 seconds) the Multi-function
button until the LED alternately flashes red and blue and pairing
mode is announced.
4. To pair, go to the Bluetooth menu on your mobile device and select
the Jabra Halo Fusion from the list of available devices.
Enter “0000” (four zeros) if you are asked for a pin code.
Note
If pairing is not successful, try the pairing steps again, or try pairing with
a different Bluetooth device. For troubleshooting tips, see here.
Optionally, try using the Bluetooth Pairing Guide which provides detailed
To Next Page
Need help?
General
