Jabra Link 14201-10 How Do

How do I connect my Jabra Pro 9400 / Go 6400 with Aastra
6753i, 6755i, 6757i?
Jabra Link 14201-10
Requirements:
Jabra Link 14201-10
DHSG connection cable from Aastra
Aastra 53i / 55i / 57i / 57iCT / 6753i / 6755i / 6757i / 6757iCT phone with
firmware 2.5.1.2000 or later.
To connect your headset to your phone follow these steps:
1. Plug the RJ10 connector (green) from the split end of the Aastra DHSG
cord into the headset socket.
2. Plug the RJ45 connector (yellow) from the split end of the Aastra DHSG
cord into the socket for the expansion module.
3. Plug the single end of the Aastra DHSG cord (blue) in the RJ45 adapter.
4. Plug the single end of the Jabra Link 14201-10 cable (blue) into the free
socket on the RJ45 adapter.
07/04/2021 01:15
https://www.jabra.com/supportpages/jabra-link-14201-10/14201-10/faq/4b3cba38-ca36-
4410-8a36-3e1fbff5b658
Page 1 of 4

Jabra Link 14201-10 Specifications

General

Product Type	USB Adapter
Connection Type	USB
Features	Plug and Play
Wireless Range	Not applicable
Weight	Not applicable