Maintenance manual for sunray hfc4da1-2c china-IV diesel engines
53
e. Install the engine oil filter and O-ring subassembly
and tighten the fixing bolts of engine oil filter bracket
to 25±5 N.m.
f. Install the engine right bracket and shock absorber
subassembly and install and pre-tighten the fixing
bolts.
g. Install the water inlet pipe gasket and water pump
inlet pipe weldment subassembly, pre-tighten the
bolt, spring, and plain washer subassembly (of water
pump inlet pipe), and install and tighten the bracket
fixing bolts at the lower end of water pump inlet pipe
weldment.
h. Install the engine left bracket and shock absorber
assembly and tighten the fixing bolts.
To Next Page
Loading...