Maintenance manual for sunray hfc4da1-2c china-IV diesel engines
57
w. Install the compressor bracket and tighten the bracket
fixing bolts.
x. Use perforated bolts II and copper washers II to install
the turbocharger oil inlet pipe assembly onto the
turbocharger oil inlet and use perforated bolts I and
copper washers I to install another end onto the
cylinder block oil hole and tighten the perforated
bolts I and II. 1. Tightening torque for perforated
bolts I is 55±10N.m; 2. Tightening torque for
perforated bolts II is 41±6N.m.
y. Install the fuel-gas separator bracket and intake
manifold bracket.
z. Install the fuel-gas separator assembly.
To Next Page
Loading...