Please close the cover and the door.
Please switch the machine off using the main
switch (fig.2, n°12) and on again after 30
seconds. Should the problem persist, please
contact your technician.
Please ensure that there is no object or dust
interfering with the loaf-holding claw.
Please remove any object in the vicinity of
the blade aperture channel and position the
loaf at the bottom on the right-hand side of
the infeed table.
Please switch the machine off using the main
switch (fig.2, n°12) and on again after 30
seconds. Should the problem persist, please
contact your technician.
To Next Page
Loading...