How to fix Jack LaLanne's Power Juicer when the motor does not run?
If the motor of your Jack LaLanne's Juicer doesn't run after being switched on, first check if the unit is properly plugged in. Then, ensure the locking bar is correctly locked in place. Also, verify that all parts are assembled properly and that there is no residue between the blade and receptacle. Finally, check if food is stuck to the bottom of the pusher.
Why does my Jack LaLanne's Power motor overheat and shut off?
If your Jack LaLanne's Juicer motor overheats and shuts off, it might be due to soft or overripe fruits and vegetables. Turn off the machine and clean the filter. Also, the motor needs to warm up for 10 seconds before use. The motor may stop running due to the built-in overheat safety control feature.
Why is my Jack LaLanne's Power Juicer motor running with loud noise and shaking?
If your Jack LaLanne's Juicer motor is running with loud noise and shaking, ensure all parts are assembled properly and in the correct position. If you are juicing overripe fruit, it may result in too much pulp and clog the filter. Turn the machine off and clean the filter to resolve this issue.
What to do if no juice is coming out of my Jack LaLanne's Juicer?
If no juice is coming out of your Jack LaLanne's Juicer, even with the spout in the downward position and the motor running, turn the power off and unplug the machine. Wait for the blade to stop spinning, then use a toothpick to loosen any obstruction in the non-drip spout.
Why does juice splash from the rim of my Jack LaLanne's Power Juicer receptacle?
This is normal.
General| Pulp Collector | Yes |
|---|---|
| Feed Chute Size | 3 inches |
| Dishwasher Safe | Yes |
| Type | Centrifugal |
| Juicing Speed | 3600 RPM |
| Warranty | 1 year limited warranty |
To Next Page
