Jackson 1524-53-JI - User Manual

To Next Page

ASSEMBLY INSTRUCTIONS

ITEM NO :1524 Jackson Manual

Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may

have come loose inside the carton during shipment.

Make sure to read the instructions below before assembling your manual sofa

The sofa requires two power transformers. Power transformer(A) for the reading lights and wireless charging pod can be

found attached to the bottom inside of the center dropdown table back with a red wire tie. The second power

transformer(B) is attached to the LAF mechanism post with red wire tie for shipment.The two read lights (C) can be

found packaged together in the magazine pouch of the drop down table back. Remove them from there packaging and set

them aside to be used later in step 3

NO TOOLS REQUIRED

PART LIST MANUAL SOFA

MANUAL

LOVESEAT

W/CONSOLE

MANUAL

RECLINER

Power Transformer

for reading lights and

wireless charging pod

(pre attached)

1 / /

Power Transformer

for the cup holders

and base light

T 1 1 1

C Reading light 2 / /

D LAF Back 1 1 /

Center Dropdown

Table Back

1 / /

F RAF Back 1 1 /

G Recliner Back / / 1

H Console Back / 1 /

Threaded Bolt

（

console back)

/ 3 /

Wing Nuts

(console back )

/ 3 /

K Plastic Washer / 3 /

L Sofa Body 1 / /

Loveseat w/Console

Body

/ 1 /

N Recliner Body / / 1

Step 1

* Attached the KD backs : Position each KD back with the KD receivers positioned over the mechanism post on the body

as pictured below .

*Check to assure both sides of the mechanism are positioned inside of the KD receivers on the back frame, pushing in a

downward motion from the top of the back frame until a clicking sound is heard.

Care should be taken with the Sofa center dropdown table back as it may try and open during this step

Need help?

Do you have a question about the Jackson 1524-53-JI and is the answer not in the manual?

This document provides assembly instructions and operating guidelines for the Jackson Manual Reclining SKU's, specifically models 1524-53-JI/54-JI/50-JI (Sofa/Loveseat with Console & Recliner). It emphasizes the importance of reading all instructions before assembly and highlights safety precautions.

Function Description:

The device is a manual reclining sofa, loveseat, or recliner, designed for comfort and convenience. It incorporates several features to enhance user experience, including:

Reclining Mechanism: Allows users to adjust the backrest and footrest for a comfortable reclining position.
Power Transformers: Two power transformers are included.
- Transformer A: Powers the reading lights and a wireless charging pod. This transformer is pre-attached to the bottom inside of the center dropdown table back.
- Transformer B: Powers the cup holders and base light. This transformer is attached to the LAF (Left Arm Facing) mechanism post.
Reading Lights: Two reading lights are provided, designed to be used with the USB ports located in the center dropdown table back. They are stored in the magazine pouch of the dropdown table back.
Wireless Charging Pod: Integrated for convenient charging of compatible devices.
Cup Holders: Located in the console, with an integrated base light.
USB Ports: Located in the center dropdown table back, specifically for the USB lights.
Center Dropdown Table Back: A versatile feature that likely includes the wireless charging pod, USB ports, and storage.

Important Technical Specifications:

Model Numbers: 1524-53-JI/54-JI/50-JI.
Power Requirements: The device requires two power transformers (A and B) for its various electrical functions. It is crucial to plug these transformers into a grounded outlet to prevent shock or damage.
Assembly: The product requires assembly, primarily involving attaching KD (Knock-Down) backs to the main body and securing the console back with provided hardware. No special tools are required for assembly.

Usage Features:

Reclining Operation: The manual reclining mechanism allows for easy adjustment of seating positions.
Light Button (Cup Holder and Base Light On/Off): A dedicated button controls the cup holder and base light.
- Sofa, Loveseat with Console & Recliner LAF Cup Holder Only: The light button controls the light in the cup holder and the base light found across the bottom front of the product. Touching the button will turn the light on and off.
- Recliner LAF Cup Holder Only: The light button in the LAF cup holder turns the light on and off in both the LAF & RAF (Right Arm Facing) cup holder as well as the base light.
- Sofa & Loveseat with Console RAF Cup Holder Only: The light button controls the light in the cup holder only.
USB Lights: These lights are specifically designed for use with the USB ports in the center dropdown table back. When not in use, they should be stored in the magazine pouch or hidden storage under the arm pads.
Wireless Charging: The integrated wireless charging pod allows for convenient charging of compatible devices.

Maintenance Features:

Pre-Assembly Check: Users are advised to check all packing material carefully for small parts that may have come loose during shipment.
Proper Assembly: Following the assembly instructions carefully is crucial for the proper functioning and longevity of the product. This includes ensuring KD backs are correctly positioned and secured until a "clicking sound" is heard, and not overtightening wing nuts when attaching the console back.
Electrical Safety: Do not plug either power transformer into a power outlet until the product is completely assembled and in its intended location. Always plug power transformers into a grounded outlet to prevent shock and damage.
Storage of USB Lights: When not in use, the USB lights should be stored in the magazine pouch or hidden storage under the arm pads to prevent loss or damage.

Assembly Steps Summary:

Attach KD Backs: Position each KD back over the mechanism post on the body, ensuring both sides of the mechanism are inside the KD receivers on the back frame. Push down until a clicking sound is heard. Care should be taken with the Sofa center dropdown table back as it may open during this step.
Attach Outside Backs: Secure outside backs across the bottom rear of each seat rail using the pre-attached velcro.
Attach Power Transformer B: After attaching KD backs, connect power transformer (B) to the matching plug in the center of the rear mechanism baserail.
Loveseat Only - Attach Console Back: Attach the console back (H) using the provided hardware (threaded bolts I, wing nuts J, and plastic washers K). Position the console back over the rear of the console, align the holes, and start all wing nuts before completely tightening. Avoid overtightening to prevent damage.

The document emphasizes that the product should not be plugged into a power outlet until fully assembled and in its final location. It also includes a revision date of 1/2/2019 for Jackson 1524.

Jackson 1524-53-JI Specifications

General

Brand	Jackson
Model	1524-53-JI
Category	Indoor Furnishing
Language	English