Jacob Jensen Telephone 3 User Manual

20
Assembling the table stand and telephone cords
Slide the canals of the table
stand into the tracks of the
base. The table stand is
mounted when you hear a
click.
Fit the modular contact of the
coiled cord into the plug of
the telephone.
Fit the modular contact of the
coiled cord into the plug of
the handset.
Connect the line cord to the
base and to the telephone
wall outlet.
Disconnect the coiled cord
and the line cord from the
base. Push the button inside
the square hole next to the
modular jack using a pen or
a finger, and pull the bracket
away from the base at the
same time.
Disassembling the table stand

Jacob Jensen Telephone 3 Specifications

General

Brand	Jacob Jensen
Model	Telephone 3
Category	Telephone
Language	English