Do you have a question about the Jacobsen 69168 – Turfcat T628D, D1305-E3B, 2WD and is the answer not in the manual?
Essential rules for operating the mower safely and preventing accidents.
Key safety alerts, hazard definitions, and critical warnings for operator.
Details on machine models, serial numbers, and identification plates.
Technical specifications for the Kubota D1305-E3B engine model.
Technical specifications for the Kubota D1105-E4B engine model.
General specifications related to the mower itself.
Specifications for the mower's cutting units, including width and capacity.
Dimensions and weight specifications for different mower configurations.
Information on available accessories and essential support literature.
Official declaration of the product's conformity with relevant directives.
Identification and explanation of critical safety and operational decals on the machine.
Guidelines for performing initial inspections by trained technicians.
Detailed checklist for pre-operation visual inspection of the mower.
Explanation and operation of traction, neutral latch, and parking brake pedals.
Operation of lift lever, throttle, and hourmeter controls.
Description of ignition switch, PTO switch, and indicator lights.
Interpretation of warning lights and audible alarms for system monitoring.
Procedures for daily pre-operation checks of the mower.
Testing and understanding the mower's safety interlock system.
Step-by-step guide for safe and effective mower operation.
Proper procedures for starting the mower engine.
Instructions for safely stopping and parking the mower.
Guidelines for driving and transporting the mower.
Safe operating practices for mowing on slopes and hillsides.
Recommended mowing speeds for optimal cutting quality.
Procedures and tips for effective mowing.
Post-operation procedures including cleaning and refueling.
Safe procedures for towing and trailering the mower.
Daily maintenance tasks to ensure proper mower function and longevity.
General guidelines and warnings for maintenance and lubrication.
Visual guide to lubrication points on the steering mechanism.
Schedule for recommended service and lubrication intervals.
General precautions and advice for performing maintenance.
Important information and break-in procedures for the engine.
Procedures for checking and changing engine oil.
Instructions for inspecting and maintaining the air filter.
Safe handling procedures for fuel and refueling guidelines.
Maintenance procedures for the fuel water separator and fuel filter.
Information on the hand primer pump for fuel system purging.
Steps for bleeding air from the fuel system.
Safety precautions and procedures for servicing the battery.
Step-by-step guide for jump starting the mower.
Procedures for safely charging the mower battery.
Safety warnings and inspection procedures for hydraulic hoses.
Procedures for changing hydraulic oil and replacing the filter.
Precautions and checks for the mower's electrical system.
Safety warnings and maintenance for the muffler and exhaust system.
Proper inflation and inspection of mower tires.
Safe procedures for mounting wheels onto the mower.
Guidelines for cleaning and caring for the mower and its components.
Procedures for checking and maintaining the radiator and coolant.
Procedures for storing the mower, battery, and engine.
General warnings and guidelines for performing adjustments.
Procedures for adjusting the mower's parking brake.
Steps for adjusting the alternator belt tension.
Adjusting rear wheel toe-in and steering shaft alignment.
Adjusting the traction pedal for proper operation and alignment.
Reference chart for standard torque values for fasteners.
Troubleshooting chart for common engine and mower operational issues.
Procedures for diagnosing and improving mower cut quality.
Causes and remedies for washboarding effect on turf.
Identifying and correcting step cutting issues in turf.
Diagnosing and resolving grass scalping problems.
Causes and solutions for scattered uncut or poorly cut grass blades.
Identifying and rectifying streaks of uncut grass.
Causes and remedies for concentrated grass clippings forming windrows.
Addressing issues caused by inconsistent cutting unit height adjustments.