Jacuzzi J - 465 User Manual

Page 68
J-400
4. Press the Splash button once to save settings.
5. Press button D to return to the submenu (Figure I) to continue
programming the start time and duration.
6. Press the Down button on the Quad
keypad to select “Start Time” (Figure
K). Press the Left or Right button on
the Quad Keypad to select the time
you wish the spa to run. Press the
Down button to access the
“Duration” submenus.
Note: If you are using a standard 12-
hour period, you will see the hour displayed as “1PM.” For the
24-hour period it will read “1300.”
7. Now you will need to adjust the
cycle “Duration” (Figure L). Cycle
duration range is adjustable from 0
(OFF) to 6 hours. Press the Left or
Right button on the Quad Keypad to
make adjustments in increments of 1
hour.
Note: The default “Duration” is OFF.
8. Press the Splash button on the Quad Keypad to save your changes
and return to the Heating Menu. At this point you can program a
Secondary Heating Mode (Program B) or press button B to enter the
“Settings 2” Menus (see Section 13.0, page 71).
B. 
1. To program the Secondary Heating
mode press the Down button on the
Quad Keypad to access the
“Program B” (Figure M) settings.
Press the Splash button to enter the
submenus for Program B.
2. From this menu (Figure N), you can
set the days, times, and duration.
With “Day Settings” selected, press
the Splash button on the Quad
Keypad to conrm selection.
PROGRAM A
Start Time
Day Settings
Duration
Select
Start Time
1PM
Press to Save
2
A
Figure K
PROGRAM A
Start Time
Day Settings
Duration
Select
A
Press to Save
Duration
OFF
2
Figure L
PROGRAMS
Program A
Press to Enter
Select
B
Program B
2
Program B
Figure M
PROGRAM B
Start Time
Day Settings
Duration
Select
Day Settings
Press to Enter
2
B
Figure N

Jacuzzi J - 465 Specifications

General

Brand	Jacuzzi
Model	J - 465
Category	Hot Tub
Language	English