Jacuzzi J-485 - Page 60

54
J-400
C. Programming the ProClarity/ProClear Filter Timer
A programmable lter timer can be set to remind
you when to clean or replace the lters and
skimmer bag. Tap
ProClarity 60
(Figure 12.6b)
to enter the Programming Menu.
1. From the “Water Care” Menu you can to set
the “ProClarity” timer, Figure 12.6e.
2. Tap or to change the days in 10-day
increments. The range is from OFF to 180 days.
Note: It is not recommended that this feature be turned OFF. In order to
continually maintain clean and working lters, it should be program as
instructed.
3. Tap to conrm and save your changes.
4. Tap to return to the “Water Care” Menu. Tap again to return to the
Settings Menu.
5. When the timer expires, a message will appear on the control panel
display, page 76. The lters must be cleaned or replaced. Follow
the instructions above to reset the timer. If you tap “snooze” the
message will clear but the error icon will display and the reminder
screen will reappear in 10 days. Refer to Section 13.1, page 59,
for cleaning instructions.
D. Programming the ProClarity Depth Filter Timer
A programmable lter timer can be set to remind
you when to replace the ProClarity Depth Filter.
Tap
ProClarity Depth
50
(Figure 12.6b) to enter the
Programming Menu.
1. From the “Water Care” Menu you can to set
the “ProClarity Depth” timer, Figure 12.6f.
2. Tap or to change the days in 10-day
increments. The range is from OFF to 90 days.
Note: It is not recommended that this feature be turned OFF. In order to
continually maintain clean and working lters, it should be program as
instructed.
3. Tap to conrm and save your changes.
4. Tap to return to the “Water Care” Menu. Tap again to return to the
Settings Menu.
5. When the timer expires, a message will appear on the control panel
display, page 76. Follow the previous instructions to reset the
timer. The lter must be replaced. Refer to Section 13.1, page 59,
for lter location. If you tap “snooze” the message will clear but the
error icon will display and the reminder screen will reappear in 10
days.
Figure 12.6e
60
60 days left
add
days
ProClarity
50
40 days left
add
days
ProClarity Depth
Figure 12.6f