21
8639&0)7,338-2+*03;',%68
,IEX4YQT*EMPWXS3TIVEXI
Is the heater
operating c orrectly?
Is the heater
operating correctly ?
Is the heater
operating correctly ?
Is the heater
operating correctly ?
The heater is equipped
wit h a f iv e m inute
delay. Wait at least
five minutes to allow
the timer to reset.
The heat er is equipped
wit h a f i v e m i nute
delay . Wait at least
five minutes to allow
the timer to reset.
AquaCal
for Assistance at
800-786-7751
Contact
for Assistance at
877-278-2797
Problem
Solv e d.
(Verif y water
temperature
settings are as
desired.)
Problem
Solved.
(Verif y water
temperature
settings are as
desired.)
Yes No
No
NoYes
Yes
Is the unit operating
correctly ?
Is the unit operating
correctly ?
Yes
No
Is the Pool or Spa
thermostat selected f o r
the correct body of
wat er to be heated,
and have you tried
selecting a higher
temperature setting?
Is the Pool or Spa
thermostat selected for
the correct body of
water to be heated,
and have y ou tried
selecting a higher
temperature setting?
Display is illuminated. If
"FLO" is displayed,
check to be sure the
circulating pump is
operating and the f ilter
is clean. There may
also be a v a l v e
positioned incorrectly .
Be certain water is
f lowing through the
heater.
Display is illuminated. If
"FLO" is displayed,
check to be sure the
circulating pump is
operating and the f ilter
is clean. There may
also be a v alv e
positioned incorrectly .
Be certain water is
f lowing through the
heater.
If not, ensure the main
breaker (located at the
power supply panel)
and the disconnect
switch (located near
the heat pump) are
both turned ON.
If not, ensure the main
breaker (located at the
power supply panel)
and the disconnect
switch (located near
the heat pump) are
both turned O N .
START
Isthe D i s p l a y I lluminated?,
START
Is the Display Illuminated?
To Next Page
Loading...
Need help?
General