7
The connection to the electrical plant mounted in the bath unit
must be made with a sheathed cable having characteristics not less
than H 05 VV-F 3x2.5 mm
2
.
The appliance must be powered by a differential cir-
cuit breaker; the operating current must not exceed
30mA.
Parts which contain electrical components, with
the exception of remote control devices, must be
placed or attached in such a way so they do not
fall into the tub. Powered components and appli-
ances must be accessible to those persons in the
tub.
”Projecta by Jacuzzi
®
” whirlpool baths are fitted
with a terminal, located near the pump and labelled
with the symbol , for the equipotential connec-
tion of the surrounding metal components, as re-
quired by regulations EN 60335.2.60.
WARNING: Disconnect electrical power supply to
the tub before any servicing operation.
2
2
3
3
0
1
3
0
1
0,6 m
0,6 m
0,6 m
2,25 m
To Next Page
Loading...
Need help?
General