▍General Param
Press SETUP→ Set Weight→ General Param:
Weight CK
------------------------------------------------------------
Beep up:There is beep, when the item on the weighing pan is greater than the
upper limit.
Beep low:There is beep, when the item on the weighing pan is smaller than the
lower limit.
Beep in:There is beep, when the item on the weighing pan is between upper
and lower limits.
Beep out:There is beep, when the item on the weighing pan is smaller than the
lower limit or greater than the upper limit.
Note: the item on the weighing pan should be more than or equal to 20e.
▍Unit Weight Save and Calling-out
1. Press Save Record to save the upper/lower limit setting, and enter the
record title as following: