JIF-2002 WEIGHING INDICATOR&CONTROLLER
2
1-1 Welcome
The JIF-2002 weighing indicator is a model of breakthrough
high resolution. With set-point codes, this model makes batching
control an easy task. With relatively compact size, JIF-2002
performs a remarkable accuracy and speed.
With sincere gratitude for your using our products, once any
question or problems occurred, please contact us immediately
for further services.
1-2 Features
JIF-2002 Weighing Indicator & Controller Features:
1/16,000 display resolution (Max. 1/ 60,000 depending on load
cell quality & performance).
Internal Resolution 1,000,000, A/D Conversion rate 120 times/
Sec.
Watchdog virtually eliminates malfunctions that associated
with computerized equipment or software failure.
Full Digital Calibration makes setting ZERO and SPAN
Calibration an easy task.
Drives up to 8 parallel connecting load cells.
8k bytes SRAM with Li-battery backup.
Information will not disappear even power failure.
The settings of function and weighing parameters are all
stored in the EEPROM, with storage duration over 40 years.
Important values and parameters can have storage backup.
Users can adjust the intensity of digits filter to avoid
mechanical vibration that caused by external environments
to achieve high-speed and accurate measurement.
Set point codes can store up to 100 sets of： Final, SP1, SP2,
Free Fall, HI, LO.
To Next Page
Loading...
Need help?
General