JIF-2002 WEIGHING INDICATOR&CONTROLLER
4
1-3 System Function Introduction
SYSTEM CHECK :
※ CHECK DISPLAY
※ CHECK SARM, EEPROM
※ CHECK INPUT, CODE
※ CHECK OUTPUT
※ CHECK KEY
SETTING FUNCTIONS:
※ SETTING GENERAL FUNCTIONS (F0XX, FCXX)
※ SETTING CONTROLS (F1XX)
※ SETTING SERIAL INTERFACE (F2XX)
※ SETTING PRINTER (F3XX)
※ PARAELLE OUTPUT (BCD) (F4XX)
※ ANALOGE OUTPUT (F5XX) (4∼20 mA , 0∼10 V)
CALIBRATION:
※ CAL
Setting Minimum Division
Setting Decimal
Setting Maximum Capacity
ZERO Adjust
SPAN Adjust
KEY LOCK:
Disable unimportant or useless keys.
SYSTEM PARAMETER BACKUP:
JIF-2002 another copy of preset parameters.
SYSTEM PARAMETER RESTORATION:
Restore preset parameters.
SYSTEM INITIALIZE:
Re-install resets the JIF-2002 to the initial factory setting and starts the
operation.
To Next Page
Loading...