Jadever SNUGIII Series User Manual

JADEVER SCALE
SNUG III
8
Ozt
(TROY OUNCE)
------------------------
Dwt
(PENNY WEIGHT)
------------------------
MM (JPN) ------------------------
tl.j
(HONGKONG JE
WELRY TAEL)
------------------------
tl.T
(TAEL(TWN))
------------------------
tl.H
(HONG KONG
TAEL)
------------------------
t (INDIA) ------------------------
AU-no No function of Auto Stop
AU-5 Auto Stop 5 min later
AU-15 Auto Stop 15 min later
AU-30 Auto Stop 30 min later
Setting of Auto Stop
time
Note: if a scale is started
and becomes stabilized
but it is still idle, it will stop
automatically according to
the set time.
☆
AU-60
Auto Stop 60 min later
2400 ------------------------
4800 ------------------------
Setting of RS-232
transmission
function
Note: Selection of
transmission speed
☆
9600
------------------------
d 0 No limitation of zero display
d 1
In case the indication is below
zero, the value may be
displayed only after at least 2
resolutions are loaded.
☆
d 2
In case the indication is below
zero, the value may be
displayed only after at least 3
resolutions are loaded.
Range of zero
display
Note: It may improve zero
draft caused by
environment or other
interferences.
d 3
In case the indication is below
zero, the value may be
displayed only after at least 4
resolutions are loaded.

Jadever SNUGIII Series Specifications

General

Brand	Jadever
Model	SNUGIII Series
Category	Scales
Language	English