31
ENGLISH
Ultra Thin Perpetual watch to an authorised
watchmaker, so as to have the year plate set to
position “21”, while the necessary adjustments
are made to the date and the moon phase.
SIMULTANEOUS CALENDAR
(DAY, DATE, MONTH, AND YEAR)
AND MOON PHASE ADJUSTMENT
This operation is entirely controlled by a sin-
gle corrector located at 8 o’clock, which can be
operated via the corrector tool supplied with
the watch. Each press of the tool moves the
calendar one day forward. Therefore all that’s
needed is to set the initial calendar by pressing
the push-piece until the corresponding date
and month are displayed, to ensure that the
day, date, month, year, and moon phase pro-
gramme run correctly thereafter.
We remind you that you should not:
- Perform this calendar correction between 8
p.m. and 4 a.m..
- Move the calendar forward beyond the cur-
rent date. The movement is programmed me-
chanically and cannot be adjusted by moving
To Next Page
Loading...
Need help?
General
