30
Proceed in the same way for the following link (fi g. 3) if you
want to remove a single row of links (or the 2
nd
, 3
rd
, etc. if you
want to remove 2, 3... rows of links).
Take out the two bars (fi g. 4).
Remove the row(s) of links (fi g. 5).
Place the 2 ends of the bracelet back together and insert a
bar (fi g. 6).
Tip over the link, press on the end of the bar pivot and push
your link down until it clicks (fi g. 7).
Fig. 3 Fig. 4
Fig. 7
Fig. 5 Fig. 6
To Next Page
Loading...
