34
Removing and re tting wristlets
To alter the wristlet of your Master Compressor Diving Chronograph GMT
Navy SEALs
®
, you can remove and ret the wristlet sections.
Removing the wristlet
Hold the case in one hand, with the watch
placed crystal down on a support.
With the other hand grip the “fork” tool sup-
plied with the watch and slide it between the
horn and wristlet, in order to grip the wrist-
let bar between the teeth of the fork.
Make sure that the tool is correctly posi-
tioned on the bar, on the retractable end of
its spindle.
The bar is equipped with a spindle mounted
on a spring, which needs to be released. To
do so, press the tool onto the bar’s retract-
able end, sliding it on laterally (from the op-
posite side of the horn) to act on the spring.
Retractable
end of bar
To Next Page
Loading...
Need help?
General
