JAI SW-4010Q-MCL-M52 User Manual

Thank you for purchasing this product.
Be sure to read this documentation before use.
This documentation includes important safety precautions and instructions on how to operate the unit. Be sure to read this documentation to ensure
proper operation.
The contents of this documentation are subject to change without notice for the purpose of improvement.
@2022 JAI
User Manual
Tentative Version
SW-4010Q-MCL-M52
RGB Color & SWIR Prism Line Scan Camera
with Mini Camera Link Interface
Document Version: Tentative
SW-4010Q-MCL-M52_Manual_Ver.Tentative_2022-11-25

JAI SW-4010Q-MCL-M52 Specifications

General

Sensor Type	CMOS
Interface	Camera Link
Shutter Type	Global Shutter
Pixel Depth	8/10 bit
Lens Mount	M52
Dimensions	62 mm x 62 mm x 55 mm

Summary

Usage Precautions

Notes on Attaching the Lens

Instructions for clean lens attachment to prevent dust and ensure proper mounting.

Features

Feature Overview

Summary of camera specifications including interface, pixels, and capabilities.

Parts Identification

Lens Mount (M52-Mount)

How to mount the custom lens and precautions for attachment.

DC IN/TRIG Connector (12-Pin Round)

Connection details for power supply and trigger input.

Preparation

Step 1: Connect Devices

Connect the lens, camera link cable, AC adapter, and computer.

Step 2: Verify Camera Operation

Check if the camera is powered on and ready for use.

Step 3: Verify the Connection Between the Camera and PC

Ensure the camera is properly recognized by the computer.

Step 4: Configure Basic Settings for the Camera

Set output formats, scaling, trigger, exposure, and line rate.

Step 5: Adjust the Image Quality

Configure exposure, shutter, gain, DSNU, PRNU, and shading.

Step 7: Save the Settings

Save current configurations to user memory.

Main Functions

GPIO (Digital Input/Output Settings)

Configuration of digital input and output signals.

Gain Control (RGB Channels)

Adjusts analog base gain and digital gain for RGB.

Gamma Function

Corrects output signals considering monitor display properties.

Setting List

DeviceControl

Display and configure information related to the device.

AcquisitionControl

Configure image capture settings for the RGB channels.

AnalogControl

Configure analog control settings for the RGB channels.

DigitalIOControl

Configure settings for digital input/output.

Miscellaneous

Troubleshooting

Solutions for common issues like LED status and settings saving.

Power Supply and Connections

Addresses issues with the POWER/TRIG LED not turning green.

Specifications

Dimensions (SW-4010Q-MCL-M52)