Jameson JS-2012 - First Time Installation; Program Management Settings; Setting Favorite Programs

First Time Installation
After all connections have been made properly, switch on TV and make
sure the receiver is connected to the Main
Power. Press Power button to switch receiver
on. If you are using the receiver for the first
time or restored to Factory Default, the Main
Menu will appear on your TV screen.
1 Program Manage Settings
To access the Menu, press the MENU
button and select [Program].The Menu
provides options to adjust the Program
Manage Settings. Select an option and
press OK or RIGHT to adjust that setting.
Press the EXIT button to exit the Menu.
(1) Program Edit
To edit your program preferences (lock,
skip, favourite, move or delete), you will
need to enter the Program Edit Menu.
This Menu requires a password to access.
Enter the default password '000000'.
(1) Select [OSD Language] and press
RIGHT/LEFT key to select an language
(2)
(3) Once channel tuning is complete,
you are now ready to watch TV
Set Favourite Program
You can create a short list of favourite
programs that you can easily access.
Set Favourite TV or Radio program:
1. Select the preferred program then
press the FAVOURITE button.A heart-
shaped symbol will appear and the
program is marked as a favourite.
2. Repeat the previous step to select
more Favourite programs.
3. To confirm and exit the Menu, press the
EXIT key Disable favourite TV or Radio Program;
Press the FAVOURITE button on the Remote
Control with the heart-shaped symbol.
.
.
Select [Dish Setup] and press
RIGHT/LEFT/OK to Dish Setup menu.
(Figure:Installation Guide)
(Figure:Program Manage)
(Figure:Program Edit)
-5-