Jandy PRO Series JXI260 User Manual

INDOOR INSTALLATIONS
Category I, Category III Venting
• Vent the heater in accordance with the
National Fuel Gas Code ANSI
®
Z223.1
(NFPA
®
54).
• Category I: Install a 4" double-wall
appliance adapter to meet vent size
requirements for the heater model.
• Category III: Install vent connector or
elbow to the flue collar according to
specific installation instructions from the
vent component manufacturer.
Model
Vent Size
(Category I)
Vent Size
(Category III)
JXI200
6" (15 cm) 4" (10 cm)
JXI260
7" (18 cm) 4" (10 cm)
JXI330
8" (20 cm) 4" (10 cm)
JXI400
8" (20 cm) 4" (10 cm)
9
For detailed information, refer to the complete installation and owner’s manual.

Jandy PRO Series JXI260 Specifications

General

Model	JXI260
Category	Swimming Pool Heater
BTU Input	260, 000 BTU
Efficiency	84%
Minimum Flow Rate	30 GPM
Maximum Flow Rate	120 GPM
Heat Exchanger	Cupro-nickel
Gas Type	Natural Gas or Propane
Water Connections	2 in