26
KOOS
2. Adjustments before use
2a -
Adjusting the height of the shoulder straps
To ensure that they offer maximum protection, the shoulder straps on
the KOOS safety seat must be set just above the baby’s shoulders. Check
this height with the baby seated correctly in the safety seat.
WARNING Check and adjust the height of the shoulder straps as the
baby grows.
Changing the position of the handle
The handle has 4 positions (2c), each of which has a specific function:
Position 1: Stability. The handle prevents the baby carrier from rocking
when it is on a flat surface.
Position 2: Intermediate position. In this position, the handle is inte-
grated into the casing.
Position 3: Carrying. The position for fitting and removing the seat on
and off a JANÉ chassis or the ISOfix base and for carrying.
2b -
Your KOOS safety seat has been designed with the latest safety devel-
opments in mind and has been tested under the toughest conditions.
It has the following features:
Installation in cars:
•Car seat belt locking feature that enables the seat to be tightened for
greater stability
•Chassis ready for installation on a base with ISOfix system (optional).
Install the seat in your car with a simple click and no need to thread
seat belts through.
Comfort and safety for your baby:
•Integrated 3-point harness.
•Ventilation in the chassis making it breathable.
•Impact-absorbent material on the entire surface that comes into
contact with the baby.
Comfort for the parents:
•Pro-Fix fastenings compatible with all JANÉ types of chassis.
•4-position carry handle.
•Removable and washable upholstery.
1. Understanding your KOOS safety seat
KOOS has 3 heights for the shoulder straps. To change the position,
open the cover of the rear compartment.
Take the straps out of the current slot and pass them through the
correct one for your baby’s height.
To Next Page
Loading...
