Janome 1600P - Hook Stopper Position

7
9. Hook Stopper Position
[1] Remove the base, needle plate and feed dog.
[2] Loosen the setscrew (1) and move the hook stopper
(2) so that the center of the needle (3) is located
between the center of the hook stopper (4) and outer
side of the hook stopper spring (5).
[3] Tighten the setscrew (1) and attach the feed dog,
needle plate and base.
(1)
(2)
(3)
(5)
(4)
(2)