Replacing A-Board and Fuse
To Replace the A-board:
1. Remove the rear cover (see page 9).
2. Remove the 3 setscrews (A) and unplug the connectors from the A-board.
3. Remove the 6 setscrews (B) and 2 setscrews (C) then remove the board supporter and function button
frame.
4. Remove the 2 setscrews (D) and remove the board case then replace the A-board.
Note:
Static electricity may damage the A-board. When handling the A-board, use a static dissipative wristband
and anti-static tabletop mat.
Setscrew (A)
Setscrew (B)
Setscrew (B)
Board supporter
Function button frame
Setscrew (B)
Setscrew (A)
Setscrew (B)
Setscrew (B)
Setscrew (A)
Setscrew (B)
A - board
Setscrew (C)
Setscrew (C)
A - board case
Setscrew (D)
Setscrew (D)
Fuse
A - board
F3 AC250V 2.5A
(#000144605)
F2 AC250V 3.15A
(#000182904)
F1 AC250V 2.5A
(#000144605)
To replace the fuse:
Pry out the fuse with a screwdriver.
Replace the fuse and push it down into the fuse clip.
23
To Next Page
Loading...
