SERVICE ACCESS
REAR COVER
NOTE:
REAR COVER COULD BE REMOVED WITHOUT REMOVING FIRST FRONT COVER.
TO REMOVE
1. REMOVE THE BELT COVER (SEE PAGE 4).
2. LOOSEN THE SET SCREWS A AND B AND REMOVE THE CAP H.
3. REMOVE THE SET SCREW C, D, E, F AND G.
4. PULL UP THE 2 SPOOL PINS I AND J AND LOWER THE PRESSER FOOT LIFTER K.
5. WHILE PUSHING THE REAR COVER L NEAR THE NOTCHES L AND M, PULL UPPER
PART OF THE REAR COVER (SEE X BELLOW).
6. PULL LOWER PART OF THE REAR COVER TOWARD YOU AND SLIDE IT TO THE
LEFT (SEE Y AND Z BELLOW).
WHILE SLIDING THE REAR COVER TO THE LEFT, REMOVE THE PRESSER BAR
LIFTER K.
A
A
I
D
K
C
H
B
G
E
F
X
Y
M
L
Z
6
www.promelectroavtomat.ru
To Next Page
Loading...
