External Control (I/O / Fieldbus) 12 DESKTOP ROBOT JR3000
FOR YOUR SAFETY
Warning
Always make sure the machine is grounded through the power cord.
Do not use the machine when it is not grounded.
Improper grounding causes electric shock, fire, malfunction, or unit breakdown.
Wipe the power plug with a clean, dry cloth periodically to eliminate dust.
Dust accumulation deteriorates the electrical insulation or causes fire.
Be sure to unplug the power cord from the power outlet when the unit is not in use
for long periods of time.
Dust accumulation causes fire.
Be sure to turn OFF the unit before inserting or removing cords and cables
such as the teaching pendant cable or LAN cable.
Failure to do so causes electric shock, data loss, unit breakdown, or malfunction.
If disassembling this machine, follow the instructions in the operation
manual
Maintenance
, and do not disassemble in any other way other than
those specified. Do not modify the machine in any way.
Inappropriate disassembly or modification causes electric shock or unit breakdown.
Do not allow water or oil to come in contact with the unit, control box or the
power cord.
Contact with water or oil causes electric shock, fire, or unit breakdown.
IP Protection Rating: IP20.
If anything unusual occurs, such as a burning smell or unusual sound, stop
operation and unplug the power cord immediately. Contact Janome (details
on the back of this manual) or a Janome dealer.
Continuing to use the robot without addressing the problem causes electric shock,
fire, or unit breakdown.
To Next Page
Loading...
