Janome Memory Craft 4400 - Cycle Stitching with Mirror Image Patterns; Restarting Programmed Patterns

57
M
M
Cycle Stitching with Mirror Image Patterns
After selecting a pattern, press the Turn-over memory key.
Press the Mode key and select A Mode.
z Press Mode key and select A Mode.
x Press stitch pattern 50.
c Press memory key.
v Press Turn-over memory (TOM) key
Restarting Programmed Patterns
After stopping in the middle of your sewing, press memory
key to return to the starting position of your programmed
stitch pattern.
q Contents of program.
w The position where machine is stopped.
e Press memory key after machine is stopped.
After stopping in the middle of your sewing, press Turn-
over memory key to return to the beginning of the last
pattern sewn.
q Contents of program.
w The position where machine is stopped.
e Press Turn-over memory key after machine is stopped.
z
x
c
v
q
w
e
q
w
e