65
Replacing the Light Bulb
q Face cover plate
w Lamp socket
e Holder
r Light bulb
t Pins
* Turn the power switch off.
* Wait until the bulb has cooled down before touching it.
• Removing the light bulb
z
Open face cover plate.
x Remove the black rubber lamp socket from the lamp
holder and pull out the light bulb.
• Attaching the light bulb
c
To insert the light bulb in the lamp socket, match the pins
on the light bulb with the lamp socket holes.
v Attach the lamp socket on the holder and close face
cover plate.
z
xcv
q
w
e
r
t
To Next Page
Loading...
