Janome Memory Craft 8200QC - Sewing with the Dual Feed Device; Dual Feed Device Operation; Dual Feed Balancing Dial

JanomeFlyer.com
30
Adjusting the stitch length
The stitch length can be altered by pressing the stitch
length adjusting key.
The stitch length indication will change as the key is
pressed.
Press the “ ” sign on the key to increase the stitch
length.
Press the “ ” sign on the key to decrease the stitch
length.
Press the “ ” sign on the stitch width adjusting key to
move the needle bar to the right.
Press the “ ” sign on the stitch width adjusting key to
move the needle bar to the left.
Adjusting the needle drop position
The needle drop position of the straight stitches can be
altered by pressing the stitch width adjusting key.
4.5 9.00.0
The needle drop position can be adjusted for following
straight stitch patterns:
5.001.00 2.40
Mode 1:
Mode 2:
Mode 3:
Janome 8200 Sewing Machine Instruction Manual
www.janomeflyer.com
MC8200 Owners Manual/ User Guide