Janome Memory Craft 8200QC - Welted Buttonhole; Creating a Welted Buttonhole

JanomeFlyer.com
50
q
e
w
r
Round End and Fine Fabric Buttonholes
Machine settings
q Pattern: MODE 2: 20, 21
w Thread tension: AUTO
e Presser foot: Automatic buttonhole foot R
r Foot pressure: 5
The sewing procedure is the same as the square
buttonhole (refer to pages 45-47).
The machine will sew a buttonhole in the order shown.
q Starting point
NOTE:
The buttonhole width can be adjusted from 2.5 to 5.5.
The stitch density can be adjusted from 0.3 to 1.0.
q
e
w
r
Keyhole Buttonhole
Machine settings
q Pattern: MODE 2: 22
w Thread tension: AUTO
e Presser foot: Automatic buttonhole foot R
r Foot pressure: 5
The sewing procedure is the same as the square
buttonhole (refer to pages 45-57).
The machine will sew a buttonhole in the order shown.
Use an eyelet puncher to open a keyhole buttonhole.
q Starting point
w Eyelet puncher
NOTE:
The buttonhole width can be adjusted from 5.5 to 7.0.
The stitch density can be adjusted from 0.3 to 1.0.
q
q
w
q
e
w
r
Stretch Buttonholes
Machine settings
q Pattern: MODE 2: 23, 24
w Thread tension: AUTO
e Presser foot: Automatic buttonhole foot R
r Foot pressure: 5
The sewing procedure is the same as the square
buttonhole (refer to pages 45-57).
The machine will sew a buttonhole in the order shown.
q Starting point
NOTE:
The buttonhole width can be adjusted from 2.5 to 7.0.
The stitch density can be adjusted from 0.5 to 1.0 for
pattern 23 (mode 2) and 0.5 to 2.5 for pattern 24.
If the stitch balance of the left and right row is not
even, correct it by turning the feed balancing dial.
q
Janome 8200 Sewing Machine Instruction Manual
www.janomeflyer.com
MC8200 Owners Manual/ User Guide