19
MS5027PR
MECHANICAL ADJUSTMENT
STRETCH STITCH BALANCE
TO CHECK:
1. SET THE STITCH SELECTOR AT " ", THE STITCH LENGTH CONTROL AT STRETCH STITCH, AND
THE STRETCH STITCH ADJUSTER AT " ".
2. PLACE A PIECE OF PAPER ON THE NEEDLE PLATE AND LOWER THE PRESSER FOOT.
3 TURN THE HANDWHEEL TO MARK NEEDLE POINTS ON THE PAPER.
4. THE NEEDLE SHOULD PENETRATE THE SAME HOLE IN A FORWARD AND REVERSE DIRECTION
WHILE TURNING THE HANDWHEEL TOWARDS YOU.
SELECTED PATTERN STITCH LENGTH CONTROL
To Next Page
Loading...
