17
BUTTONHOLE STITCH BALANCE
WHEN SEWING BUTTONHOLES, THE STITCHES ON EACH SIDE OF THE BUTTONHOLE
SHOULD HAVE THE SAME STITCH DENSITY.
THE RANGE OF 9 - 11 STITCHES IN THE RIGHT SIDE ROW AGAINST 10 STITCHES IN THE
LEFT SIDE ROW CONSIDERED ACCEPTABLE.
1. SEW A BUTTONHOLE AND CHECK BOTH RIGHT AND LEFT ROW STITCH DENSITIES.
2. IF THE LEFT SIDE ROW IS DENSER THAN THE RIGHT SIDE ROW (A), TURN THE
ADJUSTING SCREW COUNTERCLOCKWISE (IN THE DIRECTION OF C).
IF THE RIGHT SIDE ROW IS DENSER THAN THE LEFT SIDE ROW (B), TURN THE
ADJUSTING SCREW CLOCKWISE (IN THE DIRECTION OF D).
MECHANICAL ADJUSTMENT
AB
CD
To Next Page
Loading...
