Janome MyStyle 100 - Page 52

52
!3
!4
b
n
b Raise and release the foot, and re-attach it
with the left side pin.
Starting just below zipper bottom stop, sew
across fabric to about 3/8" (1 cm) distance
from the basting line.
Turn fabric 90 degrees and sew a seam the
entire length of the zipper tape. Before
reaching the slider, stop the machine with
needle in fabric and raise the foot. Use seam
ripper to open a few inches of basting stitch.
!3 Unstitch basting
!4 3/8" (1 cm)
n Unzip a few inches to clear a path for
stitching.
At end of seam, sew a few stitches in reverse
to lock. Once both sides of zipper are sewn,
use the seam ripper to open the basting stitch.
Janome MyStyle 100 Sewing Machine Instruciton Manual
www.janomeflyer.com
MyStyle 100 Owners Manual/ User Guide