Janome mystyle 16 - Insert the Bobbin into the Bobbin Holder

SECTION
2. PREPARE
YOUR
MACHINE
FOR
SEWING
Prepare the Bobbin
(Continued)
*Insert
the Bobbin
into the Bobbin
Holder
___
B
1. Put the bobbin into
the bobbin 2. Pull
about 10 cm of
thread 3. Then pull
the thread clockwise
4, Slide the bobbin
cover plate while
holder so that
the thread feeds
toward you
through the tension
toward the
back of the machine
pushing it
down slightly over the
counter-clockwise
(left),
slot .A
through
the slot .bobbin.
Allow about
10 cm of
thread to show above
the needle
plate.
14