Janome mystyle 16 - Stitch Width Control; Stitch Length Control; Adjusting Stretch Stitch Balance

SECTION
2. PREPARE
YOUR MACHINE
FOR SEWING
Stitch
Width Control
Stitch Length Control
Adjusting
Stretch Stitch Balance
V Width V Length
01234511
0~
Stretch
Stltch
The stitch
width control
regulates the
The stitch
length control
regulates
the
In stretch
stitch
sewing, the stretch
stitch
width
of the stitch you select,
length
of stitch, and also has
a stretch
adjuster should
usually be in a neutral
The
higher
the
number,
the
wider
the
stitches
setting.
positiOn
(between
-+"
and
"-...
or
stitch.
The
higher
the
number,
the
longer
the
position).
When
sewing
some
fabrics,
you
stitch.
may
need
to
adjust
this
control
to
tmeans
no
feed.
i
balance
the
stitches
for
appearance
sake.
If
design seems
open like
the illustrations
To select
Stretch
Stitches,
set
this
to the
left.
adjust
the
control
slightly
control at Stretch Stitch.
Srnikirlg stretch
toward "-" until
design looks like the
NOTE:
When
you
select
built-in
center
design.
buttonhole
(blue), make sure
If the design appears
to be closed as in
that
you do not
set the stitch
4
,
the
right hand
illustrations,
turn
the
lengh control at
"Stretch
control
toward "+"
until stitching is
as
Stitch".
you
desire.
Study
the
pink,
yellow
and
blue
sections
around
Rickrack
stretch
this control.
These are
recommended zones
of
stitch length and color-coded
to the stitches
pictured on
the
stitch
indicator
panel.
19