Janome Stirling 8002D - Threading Loopers and Needles

19
AFTER SALES SUPPOR
T
AUS Hotline Costs
1300 526 663
AUS
enquiries@esqaustralasia.com.au
MODEL: 8002D PRODUCT CODE: 52832 04/2016
q
w
e
r
t
y
o
!0
!1
u
i
(A) (B)
q
w
e
z
x
c
• Threading the Lower Looper
Opentheloopercoverandsidecover.
Place the spool of thread on the right side spool pin.
* The points to thread for lower looper are marked
in green on the overlocker.
* A convenient threading chart is placed on the
machine body inside the looper cover.
z Draw the thread through the right side thread
guide from back to front: (A)
* If the thread is coming out from the thread guide
groove, pass the thread through the thread guide
hole again as shown: (B)
q Thread guide
x Pass the thread through the holes on the right
side of the thread guide plate as illustrated.
w Thread guide plate
c Pass the thread through the right side of the
looper thread guide, sliding the thread from left
to right.
e Looper thread guide