Replacing the Light Bulb
1. Turn off the power switch and unplug the
machine.
2. Loosen the face plate set screw, and remove
the face plate.
q
Face plate
w
Set screw
To remove:
Push and twist to the left.
To attach:
Push and twist to the right. Reattach the face plate,
and retighten the face plate set screw.
e
Light bulb
r
To remove
t
To attach
Note:
* The machine is designed to use a 15 Watts
maximum light bulb.
*ThelightbulbwillbeHOT.Protectyourngers
when you handle it.
Cleaning the Feed Dog
z Turn off the power switch and unplug the
machine.
x Opentheloopercoverandsidecover.
c Remove the needles and presser foot.
v Remove the needle plate set screw, and remove
the needle plate.
A Needle plate
B Needle plate set screw
z
x
c
v
b
n
A
B
C
r
t
e
q
w
b Brush out the lint around the feed dogs to the
front by using the lint brush or use a vacuum
cleaner.
n Reattach the needle plate, presser foot and
needles.
Close the looper cover and side cover.
C Feed dog
To Next Page
Loading...
