Janome Stirling 8002D - Machine Features

8
AFTER SALES SUPPORT
AUS Hotline Costs
1300 526 663
AUS
enquiries@esqaustralasia.com.au
MODEL: 8002D PRODUCT CODE: 52832 04/2016
r
Snap-on Presser Foot
Easy to attach and detach presser foot from the foot holder.
• See"RemovingthePresserFoot"and"AttachingthePresserFoot",page13fordetails.
ADJUSTABLE
CUTTING
WIDTH
HANDY
THREAD
ADAPTABILITY
3/4
DIFFERENTIAL
FEED DEVICE
EQUIPPED
STITCHES PER
MINUTE
1300
q
Equipped Foot Pressure Adjusting Screw
Adjust this screw depending on thickness of the material.
• See"AdjustmentofFootPressure",page13fordetails.
w
3/4 Thread Adaptability
4 Thread
• See"ThreadingtheMachine",pagesbetween18and31fordetails.
3 Thread
• See"ThreadingtheMachine(3threads)",pages32and33fordetails.
e
Equipped Thread Cutter
Built in thread cutter for ease of use.
• See"FinishingSewing",page28fordetails.
t
Easy Rolled Hem Change-Over
No need to change the needle plate for rolled hemming.
Just slide the needle plate setting knob to “R” position to convert the plate for rolled hemming.
• See"AdjustmentofNeedlePlateSettingKnob(ChangingtoStandardOverlockorRolled
Hemming)",page17fordetails.
y
Adjustable Cutting Width
Easily adjust the cutting width 3.1 - 7.3mm to correct the seam tension depending on the type or
thickness of the material you sew.
• See"AdjustmentofCuttingWidth",page16fordetails.
u
Differential Feed
The differential feed device is
designed to prevent fabrics
from puckering or stretching.
Both stitch length and differential feed dials
can be set at any time, even while sewing.
Differential feed ratio : 0.5 - 2.25
• See"AdjustmentofStitchLength"and
"AdjustmentofDifferentialFeedRatio",page
14, for detail.
i
1300 Stitches Per Minute
1300 spm maximum
operating speed.
q
e
r
t
y
w
u
i
Features